General Europe [Products Information]

  1. Home
  2. Support
  3. Compatibility
  4. iPod/iPhone Compatibility for Music and Video Playback (via Dock Connector or Lightning)
  5. 2014 Multimedia Source Unit (NX404E, VX404E)

2014 Multimedia Source Unit (NX404E, VX404E)

All iPods / iPhones / iPads are called “iPod” in the instructions below.

Instructions for connection

・The CCA-750 is required for video playback.
・To use the regular control mode with the iPod 5G, you must first connect the iPod by using the optional connection cable and then set the Analog / Digital switch to Analog.
・Your device may not work if the following warnings are displayed: "This accessory may not be supported" or ""Please check your iPod."
・A connection may be unsuccessful if the iPod cover is still on.
・Please try reconnecting your iPod, if the navigation/audio unit display freezes.
・The video 'Resume' function may not work correctly with some iPod versions. If you encounter problems, please follow the steps below:
  Restart the vehicle, reconnect or connect the cable, switch back from another source or music mode or any interruption.
・Apple products with Lightning connectors (e.g. iPhone5) are not able to play video, as they have no video output capability.

Compatibility List

iPod Model
Software Version
Audio
Video
iPhone 5s
7.1
-
iPhone 5c
7.0.4
-
iPhone 5
7.0.4
-
iPhone 4s
7.0.4
iPhone 4
7.0.4
iPhone 3GS
5.1.1
iPhone with video
1.3
iPod touch
5th generation
7.0.4
-
iPod touch
4th generation
6.1.3
※C11, C15
iPod touch
3th generation
5.1.1
iPod nano
7th generation
1.0.2
-
iPod nano
6th generation
1.2
-
iPod nano
5th generation
1.0.2
iPod nano
4th generation
1.0.4
iPod nano
3rd generation
1.1.3
iPod classic
1.1.2
iPod 5th generation
1.3

Further Information

Troubleshooting Compatibility Problems

Compatibility will depend on the iPod software configuration. Problems may occur because of the settings or software version used on your device, especially when playing complex, long games.
Please follow the steps below to troubleshoot such issues:
  1. Check that the file can be played normally on your iPod while disconnected from the unit.
  2. Select Play or Pause on your iPod, while disconnected from the unit. Then connect it to the unit and check if it carries on playing normally after connection.
  3. If it is still unstable, please reset the iPod a few times before connecting it. You may need to turn the ACC off and then on again.
  1. Home
  2. Support
  3. Compatibility
  4. iPod/iPhone Compatibility for Music and Video Playback (via Dock Connector or Lightning)
  5. 2014 Multimedia Source Unit (NX404E, VX404E)

Top page