2014 Multimedia Source Unit (NX404, VX404)
- Instructions for connection
- Compatibility List
- Further Information
- Troubleshooting Compatibility Problems
All iPods / iPhones / iPads are called “iPod” in the instructions below
Instructions for connection
・The CCA-750 (30-pin Apple dock connector) is required for video playback.
・To use regular control mode with the iPod 5G, you must first connect the iPod using the optional connection cable and then set the Analog / Digital switch to Analog.
・Your device may not work, if the following warnings are displayed: "This accessory is not the most adapted ", or ""Please confirm the iPod".
・Connection may be unsuccessful if the iPod cover is still on.
・Please try reconnecting your iPod, if the navigation/audio unit display freezes.
・The video 'Resume' function may not work correctly with some iPod versions. If you encounter problems, please follow the steps below:
Restart vehicle, reconnect /connect cable, switch back to video from other sources or music mode.
・Apple 30-pin dock connector devices
- Audio Playback: USB to 30-pin dock connector cable or CCA-750 (30-pin Audio/Video cable) sold separately
Source Mode: iPod Audio
- Video Playback: CCA-750 (30-pin Audio/Video cable) sold separately
Source Mode: iPod Video
・Apple Lightning connector devices
- Audio Playback: USB to Lightning cable
Source Mode: iPod Audio
- Video Playback: Requires Apple Digital Audio/Video Adapter, USB to Lightning Cable, and HDMI cable
Source Mode: HDMI
Compatibility List
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5th generation |
|
|
|
|
4th generation |
|
|
|
|
3th generation |
|
|
|
|
7th generation |
|
|
|
|
6th generation |
|
|
|
|
5th generation |
|
|
|
|
4th generation |
|
|
|
|
3rd generation |
|
|
|
|
|
|
|
|
|
|
|
|
|
Further Information
- The unit can play AudioBook files, but the reading speed cannot be adjusted.
- Do not turn the ACC off while playing videos, as the video will not continue playing from where it was stopped.
- An asterisk (*) will be displayed when the device is in audio mode. A garbled character will be displayed when in navigation mode, if an asterisk is not available.
- The unit does not support iPod Shuffle.
Troubleshooting Compatibility Problems
Compatibility will depend on the iPod software configuration. Problems may occur because of the settings or software version used on your device, especially when playing complex, long games.
Please follow the steps below to troubleshoot such issues:
- Check that the file can be played normally on your iPod while disconnected from the unit.
- Select Play or Pause on your iPod while disconnected from the unit. Then connect it to the unit and check if it carries on playing normally after connection.
- If your device still doesn't work, reset the iPod a few times before reconnecting it. You may need to turn the ACC off and then on again.
