General Europe [Products Information]

  1. Home
  2. Support
  3. Software Update
  4. NX502E Software Update
  5. NX502E Software Update

NX502E Software Update

NX502E Software Update Instructions ( for MPU, MCU and BT )

1.Preparation
1-1.You will need a Blank microSD Card that has a capacity of more than 256MByte.
DO NOT USE THE NAVIGATION microSD CARD TO DO THIS UPDATE !!
 
1-2.For NX502E, please download the "NX502E.zip" file from download page and save to your computer.

NX502E.zip (84.7MByte)

1-3.After the download is complete you will need to unzip the "NX502E.zip" file using WinZip.
(http://www.winzip.com/downwz.htm )
Please extract the following files and folder, then copy all files and folder to the Blank microSD Card.
Files: MCU.bin, BT.bin, BTVer.bin, bootloader.bin, flasher.bin, updater.bin
Folder: CE69
Note: Before you start the update procedure, please disconnect any USB Device and/or SD card that is currently connected.
During the software update Do Not Turn the Power Off on the unit.
2.Update
2-1.MPU Update
Please update the MPU software first.
2-1-1.Please select the "Settings" option in the main menu.
2-1-2.Please remove the Navigation microSD Card that is currently inserted.
Note: The Navigation Map data is contained in the microSD Card. Be careful and do not lose or misplace this microSD Card
2-1-3.Please insert the microSD Card prepared in 1-3 into the microSD Card Slot.
2-1-4.Please select the "Version" option.
NX502E_3_2nd
2-1-5.Please select the "Update" option.
NX502E_4_2nd
2-1-6.Please select the "Right Arrow" button to the right of MPU. If this arrow is NOT Red (if Gray), please go to Step 2-2.
NX502E_5,0.jpg
2-1-7.Please select the "Right Arrow" button.
Please do not unplug, disconnect or power Off the NX502E until the update has been completed.
This portion of the update will take about one minute to complete.
2-1-8.After the MPU has been updated, the NX502E will automatically restart.
2-1-9.After the NX502E restarts, please proceed to Step 2-1-1, 2-1-4 and 2-1-5.
 
2-2.MCU Update
NX502E_6_2nd
2-2-1.Please select the "Right Arrow" button to the right of MCU.
If this arrow is NOT Red (if Gray), please go to Step 2-3.
2-2-2.Please select the "Right Arrow" button.
Please do not unplug, disconnect or power Off the NX502E until the update has been completed.
This portion of the update will take about one minute to complete.
2-2-3.After the MCU has been updated, the NX502E will automatically restart.
2-2-4.After the NX502E restarts, Please proceed to Step 2-1-1, 2-1-4 and 2-1-5.
 
2-3. BT(Bluetooth) Update
NX502E_8_2nd
2-3-1.Please select the "Right Arrow" button to the right of BT.
If this arrow is NOT Red (if Gray), please go to Step 2-4.
NX502E_9,0.jpg
2-3-2.Please select the "Right Arrow" button.
Please do not unplug, disconnect or power Off the NX502E until the update has been completed.
2-3-3.After the BT has been updated, the NX502E will automatically restart.
2-4.Final Steps
2-4-1.Please remove the MicroSD Card that contains the software updates as prepared in step 1-3.
2-4-2.Please re-insert the Navigation MicroSD Card that was removed in Step2-1-2.
2-4-3.Please restart the NX502E.
3. Concerning the updated software Version
3-1.With the NX502E powered On, please touch the Main MENU button that is located at the top left corner of the NX502E.
3-2.Please select the "Settings" option in the Main Menu.
3-3.Please select the "Version" option.
3-4.Please confirm that the following software version of.
 
 Bluetooth:HW05-SW01.63.30
 
The software version indication of MPU/MCU is not changed because of only internal data modification.
The software has been updated properly, if NX502E restarted automatically after update.
4. The contents of improvement
4-1. The contents of improvement with MPU
 1. Navigation guidance volume level.(More improvement)
 2. Freezing issue of BT and iPod modes.
 3. Navigation voice is too loud when navigation volume level is 0.
 4. Navigation voice guidance volume level
 5. Pop noise when change volume right after power off/on
 6. Black screen after engine start with car illumination on.
 7. A2DP and AVRCP behavior for iOS6
 8. Some mobile phone compatibility
 9. DAB sound level
 10. Sometimes no updating MP3 ID3 information
 11. Can not search properly from list while iPod mode.
 12. The unit freeze when switching "iPod Video" and "iPod Audio" using iPod nano 6th generation.
 13. Display the wrong title name when operate the title list while playing MP3 disc.
 14. iPod/SD volume level has been calibrated after ending a Bluetooth phone call.
 15. ID3 tag information displays correctly while in SD mode.
 16. Bluetooth Phonebook transfer has been corrected and will show less than 1,000 contacts.
 17. iPod operation pauses during a Bluetooth phone call.
 18. Improves iPod Classic (160GB) compatibility and resolves freezing issues.
 19. Tool bar in order to answer to an incoming call doesn't appear
 20. Improve no BT audio sound for only Samsung Galaxy S6/S7.
 
4-2. Contents of improvement with MCU
 1. Mute in volume "0" while iPod mode
 2. Disc eject over run.
 
4-3. Contents of improvement with Bluetooth
 1. Improve BT performance and compatibility for some mobile phones.
  1. Home
  2. Support
  3. Software Update
  4. NX502E Software Update
  5. NX502E Software Update

Top page