North and South America [Renseignements sur les produits]

  1. Accueil
  2. Assistance
  3. Mise à jour logicielle/Télécharger
  4. Multimedia Models Software update
  5. VX405 Software Update

VX405 Software Update

VX405 Improvements (2/16/2017)
• Improved Siri function
• Fixed memory lost issue
 
VX405 Improvements (9/10/2015)
• ID3 tag
• CD playback
• USB video control bar
 
Estimated Update Time: 10 minutes
Introduction
Please print the VX405 Software Update procedure prior to downloading and installing this software update.
It is important that this procedure is done in the order described in this document, as failure to do so may result in the VX405 becoming inoperable.
 
Please confirm the software version of your VX405 prior to performing the update. Refer to step “3. Confirm Result”. If the software version on your VX405 matches the version listed in step “3. Confirm Result”, then your VX405 is up to date and you do not need to perform this software update.
 
Warning: Do not perform this software update while operating the vehicle. Do not interrupt the power of the VX405 during the update process. Remember to record all the “Settings” prior to performing the update process, as after the update the settings will be reset to the factory default.
Requirements
• A Windows PC with an internet connection and a Zip/Unzip program installed into it. (http://winzip.com/downwz.htm).
• A blank microSD with 256MByte or greater of memory.
• A microSD card reader for your PC.
1. Preparation
1) Download the “VX405.zip” file and save it to your computer's desktop. The files are zip-compressed and you will need to unzip it onto your PC prior to copying the files to the blank microSD card.

VX405.zip (About 65.9MByte)

When the file is unzipped, you will see two folders.
 
SPA6BASE, SW_Update
2. Update
1) Copy the "SW_Update" folder on to the blank microSD card.
 
2) Power off the VX405 by turning off the vehicles ignition.
 
3) Insert the update microSD card into the microSD card slot of the VX405, then power up the VX405 by turning on the vehicle’s ignition.
4) Touch the "PRESS HERE TO UPDATE" button.
VX405-01
5) Touch the "OK" button.
VX405-02
Note: Do not unplug, disconnect or power off the VX405 until the update has been completed. This portion of the update will take about three minutes to complete.
 
6) After the update is completed,  VX405 will turn off and on automatically.
7) Follow the instructions on the screen to properly calibrate the touch screen. Be sure to carefully touch the center of the crosshairs (+) with your finger tip or by using a touch screen stylus pen.
VX405-03
8) After you have completed the touchscreen calibration steps, touch the screen in any location to exit the touchscreen calibration mode. The VX405 will return to the display of Step 2-4.
9) Power off the VX405 by turning off the vehicle’s ignition and remove the update microSD card that is currently inserted in the unit.
10) Insert microSD card into your PC and delete the “SW_UPDATE” folder it contains. Then, copy the “SPA6BASE” folder onto the microSD card.
11) Insert the update microSD card into the microSD card slot of the VX405, then power up the VX405 by turning on the vehicle’s ignition.
12) VX405 will start software update automatically.
VX405-04
Note: Do not unplug, disconnect or power off the VX405 until the update has been completed.  This portion of the update will take several minutes to complete.
 
13) After the update has been completed, the VX405 will return to FM mode automatically. Power off the VX405 by turning off the vehicle’s ignition and remove the update microSD card that is currently inserted.
3. Confirm Result
1) With the VX405 powered on, press the “MENU” button that is located at the top left corner of the VX405.
2) Press the “Settings” button.
VX405-11
3) Scroll to the end of the “General” tab list.
4) Touch the "Set" button.
VX405-12
5) Confirm that the following software versions have been successfully updated.
WOS_A6_V1.00.0_8243_20150227
EB2CLS_A600D_20150227
APP_V 2.2.2_0FM3_161024
MCU_V 2.1.18_0FM3_161021
MPEG_V 4.0.15_0FM3_150608
SEV_V SA9SD0_DBA_953S
VX405-13
Important: If the software versions on your unit matches the ones listed above then your update has been successfully completed. If any of the software versions do not match, please perform the software update again.
Support / Contact Information
In the event you have any difficulties executing these instructions and/or need assistance, contact Clarion Customer Service at (800)347-8667, option #2 (Monday-Friday, 7:00AM-5:00PM PST).
  1. Accueil
  2. Assistance
  3. Mise à jour logicielle/Télécharger
  4. Multimedia Models Software update
  5. VX405 Software Update

Haut de page