North and South America [Renseignements sur les produits]

  1. Accueil
  2. Assistance
  3. Mise à jour logicielle/Télécharger
  4. Multimedia Models Software update
  5. NX604 Software Update

NX604 Software Update

NX604 Improvements (12/22/2015)
 
Ver. 060  Bug fixes
Improvement History
Ver. 059: (12/19/2014)
 
• SD Card Data Corrupted Issue
• Missing SD Card Data Issue
• Bug fixes
 
Estimated Update Time: 5 minutes
Introduction
Please download and print this NX604 Update procedure prior to downloading and installing this software update. It is important that this procedure is done in the order described in this document as failure to do so may result in the NX604 becoming inoperable.
 
Please confirm the software version of your unit prior to performing the update. Refer to step “3. Confirm Result” at the end of this document. If the software version on your device matches the versions listed in step “3. Confirm Result”, then your NX604 is up to date and you do not need to perform the software update.
 
Warning: Do not perform this software update while operating the vehicle. Do not interrupt the power of the NX604 while the update is in progress. Remember to record all the “Settings” prior to performing the update process, as the unit will return to factory default settings after the update.
Requirements
• A Windows PC with an internet connection and a Zip/Unzip program installed into it. (http://winzip.com/downwz.htm).
• A blank microSD with 512MByte or greater of memory.
• A microSD card reader for your PC.
1. Preparation
1) Download the NX604_SW060.zip file and save it to your computers desktop.
 
The files are zip-compressed and you will need to unzip them onto your PC prior to copying the files to the blank microSD card.

NX604_SW060.zip (239MByte)

When the file is unzipped, you will see one folder and two files.
 
Folder: UPDATE
Files: product.inf, SU13XXXX.041
2. Update
1) Copy the one folder and two files listed above to the blank microSD card.
2) Power off the NX604 by turning off the vehicle's ignition.
3) Insert the update microSD card into the microSD card slot just below the AUX input (lower left hand corner of the unit), then power up the NX604. (Exp 1)
 
Note: Use the uppermost uncovered microSD card slot for the update. Do not remove the Mapping microSD card that is located in the lower microSD card slot that is covered by the plastic cover.
 
4) Touch the “Menu” button to switch to the Top Menu screen. (Exp.2)
NX604_1

Exp. 1

NX604_2

Exp. 2

5) Touch the "Settings" button (lower left hand corner of the screen). (Exp.3)
 
6) Scroll down to "System Software" and touch the "Version" button. If the "Version" button is grayed out, engage the parking brake. (Exp.4)
NX604_3

Exp. 3

NX604_4

Exp. 4

7) Touch the "Update" button (lower right hand corner of the screen). (Exp.5)
 
8) Touch the "Yes" button to start the update. (Exp.6)
NX604_5

Exp. 5

NX604_6

Exp. 6

Note: During the update, a black screen appears for the first 10 to 20 seconds. Do not unplug, disconnect or power off the NX604 until the update has been completed. This portion of the update will take about five minutes to complete.
 
9) Once you see "The update completed successfully." displayed on the screen, power off the NX604 by turning off the vehicle's ignition and remove the update microSD card that is currently inserted.
3. Confirm Result
1) Touch the “Menu” button to switch to the Top Menu screen. (Exp.2)
 
2) Touch the "Settings" button (lower left hand corner of the screen). (Exp.3)
 
3) Scroll down to "System Software" and touch the "Version" button. If the "Version" button is grayed out, engage the parking brake. (Exp.4)
 
4) Confirm that the following software versions have been successfully updated.
 
Software: Ver. 060
3.Confirm Result-1
Important: If the software versions on your unit matches the ones listed above then your update has been successfully completed. If any of the software versions do not match, please perform the software update again.
Support / Contact Information
In the event you have any difficulties executing these instructions and/or need assistance, contact Clarion Customer Service at (800)347-8667, option #2 (Monday-Friday, 7:00AM-5:00PM PST).
Open source notice
This product is utilizing open source software codes licensed under GNU General Public License 2 (GPL) and / or GNU Lesser General Public License 2.1 (LGPL).
Please refer to the GNU website for details of the GNU GPL and LGPL.
The machine readable copy of the corresponding source code is available here.
  1. Accueil
  2. Assistance
  3. Mise à jour logicielle/Télécharger
  4. Multimedia Models Software update
  5. NX604 Software Update

Haut de page