Australia [Products Information]

1000W MAX 12" SVC SUBWOOFER & 2CH AMPLIFIER PACK

SB3022XR

SB3022XR FEATURES

・Compact Sealed Enclosure
・30cm / 12” SVC 1000W Subwoofer
・280W 2/1 Channel Power Amplifier
・2 Channnel 8AWG Amplifier Installation Kit Inclued

WG3020 (Subwoofer) FEATURES
SB3022XR_01
・ Max Power Handling : 1000 Watts
・ Continuous Power Handling : 300 Watts
・ Single 4-Ohm Heavy Duty Black Aluminum Voice Coils
・ Aluminized IPP Dust Cap
・ Reinforced SPP Cone
・ Nitrile Butadiene Rubber High Excursion Surround
・ Hyper Extended Rear Vented Pole Piece
・ Custom Stamped Steel Powder Coated Basket
・ Frequency Response : 25-1000 Hz
・ Efficiency : 88 dB/W/m
・ Impedance : 4-Ohm
・ Outside Dimension : 12”
・ Mounting Depth : 5-7/8”
XR2220 CLASS AB AMPLIFIERS FEATURES
SB3022XR_03
・ Maximum Power Output : 280 Watts
・ Power @ 4-Ohm : 65 Watts × 2
・ Power @ 2-Ohm : 95 Watts × 2
・ Bridged @ 4-Ohm : 190 Watts × 1
・ Number of Channels : 2/1
・ MOS-FET Power Supply
・ 2-Ohm Stereo Stable
・ Selectable Bass Boost; 0/6/12dB @ 50Hz
・ Adjustable High/Low Pass Crossover, 30-300Hz
・ Gold Plated Connectors; RCA/ Speaker/ Power
・ Speaker Level Input : 2-Channel
・ Dimensions (W × H × D) (Inches) : 11.57 × 2.17 × 8.50
BWK2080 (AMPLIFIER INSTALLATION KIT) FEATURES
SB3022XR_04
・ Suitable For Applications Up-to 1,000 Watts
・ High-Quality 2 Channel Dual-twist RCA Cable
・ 8AWG Oxygen Free Power & Ground Cable
・ Speaker / Subwoofer Cable Inclued
SB3022XR_05

Gold Plated RCA and Block Terminal on XR2220 Amplifier

By utilizing gold-plated RCA and block terminals, XR2220 amplifier offer increased conductivity and low signal loss. Gold has an extremely low electrical resistance and low contact resistance, which helps to prevent voltage drops, noise, heating and other problems from occurring.
SB3022XR_06

MOS-FET Power Amp (XR2220)

There’ s only one way for Clarion’ s source units to deliver unyielding power output and linearity: MOS-FET amplification, or Metal Oxide Semiconductor Field Effect Transistor amplification. Smaller and more efficient than conventional power supplies, a MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. This means you can crank up the volume or set it to easy listening. Either way, your sound will be crystal clear.
SB3022XR_07

High/Low Pass Crossover (XR2220)

XR2220 have built-in low pass and high pass filters. This allows for easy configuration of more complicated sound systems that encompass multiple amplifiers and subwoofers.
SB3022XR_08

Compact Sealed Enclosure (WG3020B)

The 12" 1000W subwoofer is preloaded in an ultra-compact sealed enclosure that has been specifically designed for Australia's utility vehicles. Considering its dynamic sound performance, you’ll be amazed at its slim, space-saving design.
SB3022XR_09

Amplifier Installation Kit (BWK2080)

Also included is a 2-channel amplifier installation kit, so you can get your music up and running in virtually no time at all.
  1. Home
  2. Consumer Products
  3. Speaker / Subwoofer / Amplifier
  4. SB3022XR
  5. Highlight

Top page