Mexico y Latino América

Otros sitios en Español

NX602 Software Update Instructions ( for MPU, MCU and BT )

1.Preparation

1-1.You will need a Blank microSD Card that has a capacity of more than 256MB.

DO NOT USE THE NAVIGATION microSD CARD TO DO THIS UPDATE!!

1-2.For NX602, please download the "NX602.zip" file from download page and save to your computer.

■NX602.zip (80.7MB)

 

1-3.After the download is complete you will need to unzip the "NX602.zip" file using WinZip .

(http://www.winzip.com/downwz.htm )

Please extract the following files and folder, then copy all files and folder to the Blank microSD Card.

Files: MCU.bin, BT.bin, BTVer.bin, bootloader.bin, flasher.bin, updater.bin

Folder: CE69



Note: Before you start the update procedure, please disconnect any USB Device and/or SD card that is currently connected. During the software update Do Not Turn the Power Off on the unit.

2.Update

2-1.MPU Update

Please update the MPU software first

2-1-1.Please select the "Settings" option in the main menu.
<b>2-1-1.</b>Please select the

2-1-2.Please remove the Navigation microSD Card that is currently inserted.

Note: The Navigation Map data is contained in the microSD Card. Be careful and do not lose or misplace this microSD Card

2-1-3.Please insert the microSD Card prepared in 1-3 into the microSD Card Slot.

2-1-4.Please select the "Version" option.
<b>2-1-4.</b>Please select the

2-1-5.Please select the "Update" option.
<b>2-1-5.</b>Please select the

2-1-6.Please select the "Right Arrow" button to the right of MPU. If this arrow is NOT Red (if Gray), please go to Step 2-2,
<b>2-1-6.</b>Please select the

2-1-7.Please select the "Right Arrow" button.

Please do not unplug, disconnect or power Off the NX602 until the update has been completed.

This portion of the update will take about one minute to complete.
<b>2-1-7.</b>Please select the

2-1-8.After the MPU has been updated, the NX602 will automatically restart.

2-1-9.After the NX602 restarts, Please proceed to Step 2-1-1, 2-1-4 and 2-1-5.



2-2.MCU Update

2-2-1.Please select the "Right Arrow" button to the right of MCU.

If this arrow is NOT Red (if Gray), please go to Step 2-3.
<b>2-2-1.</b>Please select the

2-2-2.Please select the "Right Arrow" button.

Please do not unplug, disconnect or power Off the NX602 until the update has been completed.

This portion of the update will take about one minute to complete.
<b>2-2-2.</b>Please select the

2-2-3.After the MCU has been updated, the NX602 will automatically restart.

2-2-4.After the NX602 restarts, Please proceed to Step 2-1-1, 2-1-4 and 2-1-5.



2-3.BT Update

2-3-1.Please select the "Right Arrow" button to the right of BT.

If this arrow is NOT Red (if Gray), please go to Step 2-4
<b>2-3-1.</b>Please select the

2-3-2.Please select the "Right Arrow" button.

Please do not unplug, disconnect or power Off the NX602 until the update has been completed.
<b>2-3-2.</b>Please select the

2-3-3.After the BT has been updated, the NX602 will automatically restart.



2-4.Final Steps

2-4-1.Please remove the MicroSD Card that contains the software updates as prepared in step 1-3.

2-4-2.Please re-insert the Navigation MicroSD Card that was removed in Step2-1-2.

2-4-3.Please restart the NX602.

3.Confirm The Updated Software Versions

3-1.With the NX602 powered On, please touch the Main MENU Button that is located at the top left corner of the NX602.

3-2.Please select the "Settings" option in the Main Menu.

3-3.Please select the "Version" option.

3-4.Please confirm that the following software versions has been successfully updated.

Bluetooth

  • HW05-SW01.25.00

Application

  • 1.07.1.18 2012-06-20

MCU

  • V2.23 Jun 11 2012

If your software versions are the same, then your update has been successfully completed.

Ir al inicio de la página