U.S.A.[Products Information]

NX702 Software Update Instructions (for MPU, MCU and BT)

NX702 Periodical Update (08/07/2014)
•iPod/SD volume level has been calibrated after ending a Bluetooth phone call.
•ID3 tag information displays correctly while in SD mode.
•Bluetooth Phonebook transfer has been corrected and will show less than 1,000 contacts.
•iPod operation pauses during a Bluetooth phone call.
•Improves iPod Classic (160GB) compatibility and resolves freezing issues.
•Bug fixes
 
Includes NX702 Update (12/25/2013)
•Search in iPod mode
•Corrects freezing while switching between "iPod Video" and "iPod Audio" iPod nano 6th gen
•Displays correct title while playing a MP3 disc.
•Mute at volume "0" while in iPod mode
•Additional mobile phone compatibility improvements as listed on www.clarion.com/us/en/support/
 
Includes NX702 Update (05/23/2013)
•Bug Fixes
Includes NX702 Update (02/21/2013)
•Increases the attenuation level during navigation voice guidance
•3 way beat EQ settings no longer change without user input
•"-", "□" and "+" buttons react consistently
•Corrects freezing while using Bluetooth
•The CE69.exe error message no longer appears while in iPod mode
•Corrects pop noise while in iPod mode
 
Includes NX702 Update (10/26/2012)
•Corrects an infrequent volume issue after the NX702 is powered off and then on while in the iPod source
•The SiriusXM volume level has been calibrated
•Corrects the appearance of a black screen after starting the vehicles engine
•The Navigation voice guidance volume level has been improved
•Bluetooth audio streaming (A2DP) iPhone 5 and Apple iOS 6 devices
•Additional mobile phone compatibility improvements as listed on www.clarion.com/us/en/support/
 
Estimated Update Time:25 minutes
Introduction
Please download and print this NX702 Software Update procedure prior to downloading and installing this software update. It is important that this procedure is done in the order described in this document as failure to do so may result in the NX702 becoming inoperable.

Please confirm the software version of your unit prior to performing the update. Refer to step “3. Confirm Result”. If the software version on your device matches the versions listed in step “3. Confirm Result”, then your NX702 is up to date and you do not need to perform the software update.
 
Warning: Do not perform this software update while operating the vehicle. Do not interrupt the power of the NX702 while the update is in progress. Remember to record all the “Settings” prior to performing the update process, as the unit will return to factory default settings after the update.
Requirements
•A Windows PC with an internet connection and a
Zip/Unzip program installed into it.
(http://www.winzip.com/downwz.htm )
•A blank microSD with 256MByte or greater of memory.
•A microSD card reader for your PC.
1.Preparation
1) Download the “NX702.zip” file and save it to your computers desktop.
The files are zip-compressed and you will need to unzip them onto your PC prior to copying the files to the blank microSD card.

NX702.zip

When the file is unzipped, you will see one folder and six files.
Folder:CE69
Files:MCU.bin, BT.bin, BTVer.bin, bootloader.bin, flasher.bin, updater.bin
2. Update

Exp. SD

1) Copy the one folder and six files listed above to the blank microSD card.
 
2) Power off the NX702 and press the “OPEN” button on the bottom right corner of the NX702, and then remove the navigation microSD card that is currently inserted underneath the screen on the left. (Exp. SD)
 
Note: The navigation map data is contained on the original navigation microSD card. Be careful not to misplace or damage the original navigation microSD card.

3) Insert the update microSD card into the microSD card slot, press the “OPEN” button to close the screen and then power up the NX702.

Exp.1

4) Select the "Settings" option in the main menu. (Exp.1)

Exp.2

5) Press the down arrow and then press the "Version" button to the right of “System Software”. (Exp.2)

Exp.3

6) Select the "Update" option. (Exp.3)

Exp.4

7) Select the right facing arrow button to the right of “MPU:” (Exp.4)

Exp.5

8) Select the right facing arrow button. (Exp.5)
Note: Do not unplug, disconnect or power off the NX702 until the update has been completed. After the MPU has been updated, the NX702 will automatically restart. This portion of the update will take about two minutes to complete.

9) Once the NX702 restarts, return to the update screen using steps 4, 5 and 6.

Exp.6

10) Select the right facing arrow button to the right of “MCU:” (Exp.6)

Exp.7

11) Select the right facing arrow button. (Exp.7)
Note: Do not unplug, disconnect or power off the NX702 until the update has been completed. After the MCU has been updated, the NX702 will automatically restart. This portion of the update will take about one minute to complete.

12) Once the NX702 restarts, return to the update screen using steps 4, 5 and 6.

Exp.8

13) Select the right facing arrow button to the right of “BT:” (Exp.8)

Exp.9

14) Select the right facing arrow button. (Exp.9)
Note: Do not unplug, disconnect or power off the NX702 until the update has been completed. After the BT has been updated, the NX702 will automatically restart. This portion of the update will take about one minute to complete.

15) Power off the NX702 and press the “OPEN” button on the front of the NX702, and then remove the update microSD card that is currently inserted.
16) Insert the Navigation microSD card into the microSD card slot, and then press the “OPEN” button to close the screen.
3. Confirm Result
1) Power up the NX702 and select the "Settings" option in the main menu. (Exp.1)
 
2) Press the down arrow and then press the "Version" button to the left of “System software”. (Exp.2)
3) Confirm that the following software versions have been successfully updated.
Bluetooth : HW07-SW01.58.00
Application : 1.06.1.40 2014-04-17
MCU : V2.39 Nov 8 2013
Important: If the software versions on your unit matches the ones listed above then your update has been successfully completed. If any of the software versions do not match, please perform the software update again. After the “NX702 MPU, MCU, and BT Update” has been successfully completed the “NX702 OS Update” must be performed immediately, otherwise the unit will not operate properly.
Support / Contact Information
In the event you have any difficulties executing these instructions and/or need assistance, contact Clarion
Customer Service at (800)347-8667, option #2 (Monday-Friday, 7:00AM-5:00PM PST).
  1. Home
  2. Support
  3. Software Update / Download
  4. Multimedia Models Software update
  5. NX702 Software Update
  6. NX702 Software Update Instructions (for MPU, MCU and BT)

Top page