This software improves the following symptoms:
*DAB update
*iPod / iPhone Sound Level
CAUTION
*Please confirm software version of your unit before update.
Please refer to Step 3 to confirm current software version.
No need to update your unit if the software is below If your software version is "VM-0629-1A" .
Example:
If the software version of your unit is ”VM-0629-1A”, you do not need to update.
If the software version of your unit is "VM-0406-1A" , You need to update by "CZ702AMCU.BIN"
*Do not POWER-OFF the unit during update.
*Do not operate the unit while the unit is updating.
*After the unit has been updated all settings will be reset.
Please record all Settings that had set before you begin the update.
1.Preparation
1.1. Download
Please download ”update_tool for CZ702A.zip” file.
The file is zip-compressed , and you will need to unzip the file on your PC before copying to a Blank USB Flash Drive.
■ update_tool for CZ702A.zip
When this file is unzipped, One file is shown in ”update_tool for CZ702A” folder.
*CZ702AMCU.BIN (193kB)
2.Update
1) Please copy "CZ702AMCU.BIN" to a Blank USB Flash Drive from your PC.
2) With the CZ702A Powered ON, Insert the USB Flash Drive to the USB Port on the front of the CZ702A. The display will indicate "MCU UPG".
3) Please wait while the CZ702A is updating and DO NOT POWER OFF the unit. The CZ702A will reset automatically.
4) Please Turn the CZ702A OFF
3.Verify Software
1) With the CZ702A Powered ON and in TUNER Source, Press IN on the VOLUME Knob and Preset Button “6” at the same time for about 2-seconds.
2) Confirm that the version should be "VM-0629-1A".
3) Load any CD. Press IN on the VOLUME Knob and Preset Button “6” at the same time for about 2-seconds.
4) Confirm that the version should be "VS-0100".
5) Select AUX Source. Press IN on the VOLUME Knob and Preset Button “2” at the same time for about 2-seconds.
6) Confirm that the version should be "SW01.19.10".
If all Software Versions are correct, the CZ702A has been successfully updated.
Return to the top of the page
