CZ501E/ CZ501EG/ CZ501ER Software update
This software improves the following symptoms.
*trouble when Bluetooth connecting
*trouble when the switching Simple Control Mode for iPod/iPhone connection
*Please confirm software version of your unit before updating.
Please refer below 3. Confirm result.
No need to update your unit if the software meets the conditions below.
･When the software version is "VM-0118-1E" and "VS-0101-MX".
e.g. If the software version of your unit is "VS-0096-MX" , You need to update by "AUDIO_v2x_V101_CZ501_MXIC_101125_00_375K.mcs".
If the software version of your unit is ”VM-0118-1E”, you do not need to update.
*Do not POWER-OFF the unit during update.
*Do not operate the unit while the unit is updating.
*When the unit is updated, radio preset frequencies, audio settings, and adjustment settings stored in memory are cleared.
Please record all stored in memory before update.
Please download ”update_tool for CZ501E.zip” file.
The file is zip-compressed , and you need to unzip them on your PC before copying to a USB memory device.
update_tool for CZ501E.zip (837kB)
When this file is unzipped, Two files are shown in ”update_tool for CZ501E” folder. *CZ501MCU.BIN (129kB) *AUDIO_v2x_V101_CZ501_MXIC_110125_00_375K.mcs (1,585kB)
1) Please copy "CZ501MCU.BIN" to an empty USB memory device from your PC.
2) Insert the USB memory device to the USB slot on the unit when the unit is POWER-ON. And then the LCD will indicate “MCU UPG.”.
3) Please keep waiting and DO NOT POWER OFF the unit untill the unit reset itself automatically.
4) Remove the USB memory device from the unit. Please delete any files on USB memory device.
5) Please copy "AUDIO_v2x_V101_CZ501_MXIC_110125_00_375K.mcs" to an empty USB memory device from your PC.
6) Insert the USB memory device to the USB slot on the unit when the unit is POWER-ON. And then the LCD will indicate “SERVO UPGRADING”.
7) Please keep waiting and DO NOT POWER OFF the unit until the unit changes its mode to radio mode automatically.
8) Finished update. Please check the software version for your unit.
1) Please turn on the unit. Press VOL knob and preset button “6” in Tuner-mode.
2) Confirm that the version should be "VM-0118-1E".
3) Load any CD. Press VOL knob and preset button “6” in CD/MP3-mode.
4) Confirm that the version should be "VS-0101-MX".