Audio

Q1

DXZ925/935 Finding Bass & Treble

A1

Accessing the Bass and Treble adjustments:

1.Turn on head unit to any source.
2.Press the “ADJ” button for 1 to 2 seconds, until a submenu will appears on the display.
3.Press the Right Tuning button until “AC-PII SEL E” appears on the display, and then    press “ENTER.”
4. “AC-PII PRO/STD” will appear on the display, using the rotary volume knob, select either     “AC-PII PRO” or “ AC-PII STD” mode.
5.Press the Right Tuning button, then “EQ SELECT” will appear on the display.
6.Use the Rotary Volume knob to select “EQ BAS/TREB,” then “ADJ” to save selection.
7.Press the “EQ” button to access Bass and Treble adjustments and the Rotary Volume    knob to adjust the level. Press the “EQ” button to exit the audio adjustment mode.

Return to the top of the page

Q2

ERROR CODES - WHAT DO THEY MEAN?

A2

Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select            CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on            the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.
Error 8.Tape Drive system defective. Eating tape or something wrong with the drive system.
Error 9.Weak RF. Try alternate frequency
NO CD.CD error message. No CD is magazine or no magazine in CD Changer.

Return to the top of the page

Q3

How do I set the clock?

A3

There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored

Return to the top of the page

Q4

How many CD changers can my CeNET source unit control?

A4

A total of four changers can be connected to a CeNet source unit. The CCA-519 Y adapter will connect two changers; one more adapter is required for each additional changer

Return to the top of the page

Q5

What do the letters in the model number of my Clarion unit mean?

A5

R=radio
A=analog or tape
D=digital or CD
V=video
M=MiniDisc
B=base model
X=changer control
Z=CeNet bus

Return to the top of the page

Q6

What is the wiring code for my Clarion unit?

A6

Clarion uses the industry standard wiring colors. Not every unit will have all of the listed wires

SPEAKERS:
White = Left Front +
White/Black = Left Front –

Gray = Right Front +
Gray/Black = Right Front –

Green = Left Rear +
Green/Black = Left Rear-

Violet = Right Rear +
Violet/Black = Right Rear –

POWER/ACCESSORY:
Yellow 14ga = Battery Main/Memory
Yellow 18ga = Battery CeNET Power/Memory
Red = Accessory (ignition on)
Black = Ground
Blue = Antenna Turn On +
Blue/White = Remote Turn On (amps) +
Orange/White = Dimmer
Brown = Phone Mute
Orange or Mint Green= Parking Brake Video Lockout
White/Red = CCD (camera) input instant on +

RCA Cables:
Gray = Front Output
Black = Rear Output
Purple = Non-Fade or Subwoofer Output

Return to the top of the page

Q7

What remote works with the 1999 and up source units?

A7

Either the full-size RCB130 or the credit card size RCB114

Return to the top of the page

Q8

Why can't I access my bass and treble controls?

A8

The tone controls are automatically disabled if you have our DSP/Crossover module connected or the Z-Enhancer enabled. If not, press and hold the BAND and PRESET #3 buttons, or the BAND and RANDOM buttons

Return to the top of the page

Q9

Why is the clock on my radio acting like a counter?

A9

Some units have a timer built-in. It can be disabled by pressing the BAND and AM buttons

Return to the top of the page

Return to the top of the page