NX702E Software Update Instructions (for MPEG)
1-1.You will need a Blank USB Flash Drive that has a capacity of more than 16MByte.
1-2.Please download the "NX702E_Mpeg.zip" file from download page and save to your computer.
1-3.After the download is complete you will need to unzip the "NX702E_Mpeg.zip" file using WinZip.
Please extract the following file, then copy the file to the Blank USB Flash Drive.
Files: build.img, UPD_MPEG.VER
2-1.Please connect the USB Flash Drive that contains the software update as prepared in 1-3 to the USB Pigtail.
2-2.Please select the "USB" option in the Main Menu.
2-4.Please select the "Right Arrow" button.
Please do not unplug, disconnect or power Off the NX702E until the update has been completed.
This portion of the update will take about one minute to complete.
2-5.After the MPEG update has been completed, the NX702E will automatically restart.
2-6.Please disconnect the USB Flash Drive that contains the software update as prepared in 1-3.
3-1.With the NX702E powered On, please touch the MAIN MENU Button that is located at the top left corner of the NX702E.
3-2.Please select the "Settings" option in the Main Menu.
3-3.Please select the "Version" button.
3-4.Please confirm that the following software version has been successfully updated.
If your software versions are the same, then your update has been successfully completed.
4.Contents of improvement
4-1. Contents of improvement with EUR 0.55 2012-10-20
・Aspect is wrong.
4-2. Contents of improvement with EUR 0.56 2012-12-30
・When the length of ID3 Information is more than 250 byte, the communication between MPU and MPEG will be anomaly.
4-3. Contents of improvement with EUR 0.61 2013-10-12
・The unit displays the title of CD-Text before playing.