NX702 Software update 2

2. MPEG Update

2-1 copy the contents from the folder “NX702 MPEG” to the root of a blank USB drive.

When the files are copied you will see one folder and two files.

build.img

UPD_MPEG.VER.

2-2 Safely eject the USB memory device from your computer

2-3 Power off the NX702.

2-4 Insert the USB memory device into the USB pigtail, then power up the NX702.

2-5 Select the "USB" option in the main menu.

2-6 Select the right facing arrow button to the right of “MPEG:”

2-7 Select the right facing arrow button.

Note: Do not unplug, disconnect or power off the NX702 until the update has been completed. After the MPEG has been updated, the NX702 will automatically restart. This portion of the update will take about two minutes to complete.

2-8 Power off the NX702 and remove the USB memory device.

Confirm The Updated Software Versions

2-9 Power up the NX702 and select the "Settings" option in the main menu.

2-10 Press the down arrow and then press the "Version" button to the left of “System software”.

2-11 Confirm that the following software versions have been successfully updated.

MPEG : AME0.48 2013-10-12





3. OS Update

From the NX702_Udate.zip file, you will need to unzip the "NX702_OS.zip" file using WinZip.

(http://www.winzip.com/downwz.htm )

Please extract the following file, then copy all files to the blank MicroSD Card.

Files: Image.bin, CSUPDATE.HK

3-1. Please power Off the NX702

3-2. Please remove the Navigation MicroSD Card that is currently inserted.

Note: The Navigation Map data is contained in the MicroSD Card. Be careful and do not lose or misplace this MicroSD Card

3-3. Please insert the MicroSD Card that contains the software update as prepared in 1-3 into the MicroSD Card Slot.

3-4. Please power On the NX702. Now the software update will automatically start.

Please do not unplug, disconnect or power Off the NX702 until the update has been completed.

This portion of the update will take about one minute to complete.

3-5. After the software update has been completed, the NX702 will automatically restart.

3-6. Please remove the MicroSD Card that contains the software update as prepared in 1-3.

3-7. Please re-insert the Navigation MicroSD Card that was removed in Step 2-2.

3-8. Please restart the NX702.

Confirm The Updated Software Versions

3-9. With the NX702 powered On, please press the MAINMENU Button that is located at the top left corner of the NX702.

3-10. Please select the "Settings" option in the Main Menu.

3-11. Please select the "Version" option.

3-12. Please confirm that the following software version has been successfully updated.

OS PA01-V2.02.0038.13-13R8

If your software versions are the same, then your update has been successfully completed.

Return to the top of the page