Clarion Australia

Australia

HX-SERIES 4 channel amplifier

Specification

ADP4000

Power supply
Voltage	11 ～ 15 VDC
Minimum idling current	2.2 A
Idling current when off	0.02 mA
Consumption @ 14.4 VDC (MAX musical power)	75 A
Remote IN Voltage	7 ～ 15 VDC (1.3 mA)
Remote OUT Voltage	12 VDC (50 mA)
Internal fuse	3 x 30 A

Amplifier stage
Total Harmonic Distortion (1 kHz @ 4 )	0.07%
Frequency Response (-3 dB)	4 Hz ～ 100 kHz
S/N ratio (A-weighted @ 1 VRMS)	>105 dB
Damping factor (1 kHz @ 4 )	>120
Input sensitivity (PRE IN)	0.3 ～ 5 V
Input sensitivity (Speaker IN)	1.4 ～ 24 V
Input impedance (PRE IN)	15 kΩ
Input impedance (Speaker IN)	5 kΩ
Load impedance (MIN)
• 6 Channels 4 x 2Ω + 2 x 1Ω
• 5 Channels 5 x 2Ω
• 4 Channels 2 x 4Ω + 2 x 1Ω	2 x 2Ω + 2 x 1Ω
• 3 Channels 2 x 4Ω + 1 x 2Ω	2 x 2Ω + 1 x 2Ω
Nominal output power (RMS) PN @ 12 VDC 0.3% THD	125 W x 2 + 130 W x 2
6 Ch Output power (RMS) @ 14.4 VDC 1% THD
• 6 Channels 6 Ch x 4Ω	-
• 6 Channels 6 Ch x 2Ω	-
• 6 Channels 4 Ch x 2Ω + 2 Ch x 1Ω	-
• 5 Channels 5 Ch x 2Ω	-
4 Ch Output power (RMS) @ 14.4 VDC 1% THD
• 4 Channels 2 Ch x 4Ω + 2 Ch x 4Ω	130 W x 2 + 135 W x 2
• 4 Channels 2 Ch x 2Ω + 2 Ch x 2Ω	200 W x 2 + 215 W x 2
• 3 Channels 2 Ch x 4Ω + 1 Ch x 4Ω	110 W x 2 + 460 W
• 3 Channels 2 Ch x 4Ω + 1 Ch x 2Ω	100 W x 2 + 700 W
• 3 Channels 2 Ch x 2Ω + 1 Ch x 4Ω	170 W x 2 + 430 W

Inputs/Outputs/Filters
OUT MODE	-
IN A Ch	PRE/Speaker
IN B Ch	PRE/Speaker
IN C Ch	PRE/Speaker
OUT (Full)	PRE
A Ch Filter	BYPASS/HI-PASS [50 Hz ～ 5 kHz] (12 dB/Oct.)
B Ch Filter	BYPASS/HI-PASS/LO-PASS adjustable [50 Hz ~ 5 kHz] (12/24(Mono)dB/Oct.)
C Ch Filter	-
Subsonic	OFF/20/30 Hz (24 dB/Oct.) Active with B Ch. LO-PASS L+R
Sub remote volume control	-5 ~ +5 dB Active with B Ch. LO-PASS 24 dB/Oct. L+R

Size
D x L x H	208 x 540 x 56 mm
Weight (Kg)	6.86

Specification